Had problems for some time with the hot water side of the boiler (no problem with heating) checked out the system and the fault was with the flow switch.Changed the flow switch but the hot water is still not 100% i.e does not light every time ,AND if the hot water switch is put to constant the relay chatters continuously (as if it is trying to switch on hot water) any ideas please.Boiler is about 15 years old.
Midas B Combi hot water
- Thread starter pwtracey
- Start date
- Joined
- 5 Apr 2006
- Messages
- 1,076
- Reaction score
- 11
- Country
could be the 1000uF/16v capacitor on the W9335B1047 board
good enough ?
good enough ?
raden said:
Thanks will give it a go.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
