monument senior hacksaw

[Fallout]

Are monument senior hacksaws any good?

 

[Steelmasons]

Are you for real??
Lenox are better quality than monument.

 

[Fallout]

Need a new hacksaw wonderd if any one knew if they were any good

 

[Steelmasons]

So what hacksaw have you got sitting in your van at the moment?..are you taking the blow lamp out of the van in hot weather?..

 

[Roger928]

Bacho are good.

 

[Fallout]

Are you for real??
Lenox are better quality than monument.

Thanks just done a search the lenox ones do look good but expensive

 

[Steelmasons]

Thanks just done a search the lenox ones do look good but expensive

Do you not agree that good and expensive go hand in hand???

 

[dilalio]

Buy cheap: buy twice

 

[Madrab]

I've had an Irwin for years, never let me down. The critical point I find is spend as much as you can on good quality blades.

 

[dilalio]

I've had an Irwin for years, never let me down. The critical point I find is spend as much as you can on good quality blades.

Yep! True for all tools: hand and power.

 

[Aquaheat]

Stanley FatMax combination hacksaw is as good as they come. Has got me out of some awkward situations.

Jon

https://www.cbytools.co.uk/stanley-...1mQ34GBbik42jrmgqohR7LGugW7RjM8nraxoC2bbw_wcB

 

[oilboffin]

Eclipse 20t tried and trusted I've used them for 45years always fine saws.

 

[dilalio]

Stanley FatMax combination hacksaw is as good as they come. Has got me out of some awkward situations.

Jon

https://www.cbytools.co.uk/stanley-...1mQ34GBbik42jrmgqohR7LGugW7RjM8nraxoC2bbw_wcB

Like it John.
Ordering one now and that link is cheaper than any on eBay

 

[Aquaheat]

Like it John.
Ordering one now and that link is cheaper than any on eBay

It's really good and we'll built too. Great for flush cuts and getting into tight spaces too.

Not used that site before I just put it up as an example but if it's cheap as chips then bonus!

Let me know what you think of it.

Jon

 

[dilalio]

It's really good and we'll built too. Great for flush cuts and getting into tight spaces too.

Not used that site before I just put it up as an example but if it's cheap as chips then bonus!

Let me know what you think of it.

Jon

Will do. And to return the favour. One of the most useful tools in my box...
http://m.builderdepot.co.uk/stanley...fe-25mm.html?gclid=CJm_0reny88CFc-6GwodoXUD1g

Great for lots of things, especially for removing siliconed items!