- Joined
- 27 Sep 2004
- Messages
- 1,300
- Reaction score
- 83
- Country
I have been asked to fit an invertor to a 3 phase motor for speed control. The invertor is currently installed on another motor which is no longer required. The new motor is smaller with a 3.35A FLC and the invertor has a max output of 7.6A.
The invertor being used is this one:
http://datasheet.octopart.com/MMX34AA7D6F0-0-Moeller-datasheet-8360488.pdf
Would the contactor and overload be fitted before or after the invertor? All starting is manual at the invertor/starter not controlled by other means.
Does anyone know if paramaters need setting up on this invertor, as we can't find a tech data on this.
Thanks
The invertor being used is this one:
http://datasheet.octopart.com/MMX34AA7D6F0-0-Moeller-datasheet-8360488.pdf
Would the contactor and overload be fitted before or after the invertor? All starting is manual at the invertor/starter not controlled by other means.
Does anyone know if paramaters need setting up on this invertor, as we can't find a tech data on this.
Thanks