need to make my own mixer tap fitting . . .

[khushy]

for a little project in my wifes salon I need to make a mixer tap fitting for a hand wash bowl on display in the spa room.

It has to have an extra long/low tap nozzle\spout - hence the custom build.

This is what I am thinking . . .

15mm pipework
2 x non-return valves (hidden) + 2 inline taps (H&C) piped into 1 22mm spout with a 180 degree bend down to the bowl.

Any ideas on nice fittings for the inline taps - chrome would be nice (15 to 15mm of course) with NR internals would be nice.

Crazy - I know but has to be done!!!!

 

[Roadyz]

http://www.screwfix.com/prods/11085/Plumbing/Pegler-Brassware/Pegler-Ball-Valve-Blue-15mm

??

 

[John506]

There aren't many inline chrome taps I can think that will suit your needs.

Remember in a salon no pipework can be made of plastic incase you were thinking of piping up to and behind the sink in hep20 pipe.

Why do you need the spout to be extra long?

http://cnb-host2.clickandbuild.com/cnb/shop/tapshop?
Would something like this not do?

 

[seco services]

Remember in a salon no pipework can be made of plastic incase you were thinking of piping up to and behind the sink in hep20 pipe.

whys that ?

 

[ChrisR]

DO you mean 90 or 180? can you draw it?
Wall or pipe or floor or table mounted etc etc