Worked 2 loads then stopped mid-cycle and left a pile of water in the tub. No lights or anything. Removed all water from tub with cup and sponge. Reset breaker then left breaker off for 1 hour then turned back on. Still no lights or function.
New Bosch SHP7PT55UC/02 dishwasher failure
- Thread starter SCPDaddy
- Start date
- Joined
- 21 Sep 2011
- Messages
- 4,836
- Reaction score
- 1,165
- Country
Check the hight of the outlet hose
It may be too low, as a rule it needs to rise to just under worktop level before dropping to connect into the waste. Check the installation instructions for hose connections
It may be too low, as a rule it needs to rise to just under worktop level before dropping to connect into the waste. Check the installation instructions for hose connections
It connects to the air gap fitting at the countertop like the old one did for 20 years, and per the Bosch instructions.
Out of nowhere at 11 pmish last night it decided to power on and start a load cycle, finishing normally like nothing had ever happened.
Bewitched dishwasher.
Out of nowhere at 11 pmish last night it decided to power on and start a load cycle, finishing normally like nothing had ever happened.
Bewitched dishwasher.
- Joined
- 21 Sep 2011
- Messages
- 4,836
- Reaction score
- 1,165
- Country
Spooky!
I seem to remember reading somewhere that Bosch have a cut out that shuts off in case of flooding maybe it got wet and has now dried and reset
I seem to remember reading somewhere that Bosch have a cut out that shuts off in case of flooding maybe it got wet and has now dried and reset
- Joined
- 21 Sep 2011
- Messages
- 4,836
- Reaction score
- 1,165
- Country
Edit duplicate post
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local