New multi fuel burner

Joined
13 Jul 2012
Messages
79
Reaction score
0
Country
United Kingdom
Just had a new Firefox 8 kw multi fuel burner installed by hetas engineers and it does a fantastic job. Only thing is we have noticed condensation on windows downstairs and its only our first night using it?

Any thoughts? Thanks
 
Have you a CO alarm? Condensation can be sign of spillage
 
Could be that, now you have a register plate fitted, blanking off the bottom of the chimney, you have now lost a part of the ventilation in your room.

You should have a perminant vent to outside air fitted and a CO alarm.

Try not using the stove and see if the condensation happens.

As already said it sounds like you need more ventilation.

Andy.
 
We have never noticed condensation before. There builders opened out an air brick that was blocked out, as if the stove is over 5 kw you need and air vent to abide by hetas regulations. Would it be best to ring the builders to inform them?
 
That's the plan gonna add them to existing windows any other suggestions?

There is no point, if you already have sufficient ventilation. Try opening a window a little, with the stove on. If the condense disappears, you have insufficient permanent ventilation.

Of course, it may be that the weather has changed. Brrrrr.
 
If I instal them and leave them open all the time then surely that will increase my permanent ventilation thought?
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top