one more thing. any advice re removing the nuts etc when rewiring, thinking particularly the earth. they look pretty rusted - worried about causing damage. could I spray WD40 on first?
No hot water
- Thread starter rshort1987
- Start date
Sponsored Links
one more thing. any advice re removing the nuts etc when rewiring, thinking particularly the earth. they look pretty rusted - worried about causing damage. could I spray WD40 on first?
So, I've encountered another issue. I re-wired the element in, all went ok. However, as the immersion came on I noticed a smell and a little smoke coming from the cover. I removed it and there was smoke coming from the neutral wire and it was glowing a bit orange! I have attached some pictures which hopefully show this, is there any reason why this may have happened? It appears to have melted some of the wire cover. Any suggestions would be great. I have isolated the power at present.
Cheers
Cheers
Attachments
Sponsored Links
Thanks. I tried tightening it and I could a bit, so i'll re-do it and make sure the neutral is really tight
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
