I've been having problems with my my HW. CH heating is working fine but we are not getting any hot water. I've changed the actuator on the 2PMV & it makes the correct noise but the boiler doesn't seem to fire up for water heating. For the past 2 weeks I have had the actuator removed off the HW valve & I've manually opened it. We have had HW running into the cylinder when the heating has been switched on. It has been fine, albeit bloody hot but with the new actuator the problem is still there.
The boiler is a terribly ancient but very reliable Ideal Concord WRS series.
Are there any things that I could check/replace to get the boiler firing on HW operation again?
Many thanks
The boiler is a terribly ancient but very reliable Ideal Concord WRS series.
Are there any things that I could check/replace to get the boiler firing on HW operation again?
Many thanks