Hi, hope someone can point me in the right direction.
I have the above boiler, which over the last couple of years has given me a few problems. It was taking a long time to 'fire up', kept on searching and after a minute or 2 would fire. I have turned the dial on the front down to one and that seems to have stopped that. At night when the system is off, the pump seems to stay on (all night) if the power to the system is not switched off. Last night after the heating and hot water had turned off the pump was still running and I found the boiler still lit.
Is this the PCB ? Is it something I can change easily (fairly confident with electrics etc) and are there different quality boards if this is the case ?
(have seen very cheap on fleabay)
Thanks in advance
I have the above boiler, which over the last couple of years has given me a few problems. It was taking a long time to 'fire up', kept on searching and after a minute or 2 would fire. I have turned the dial on the front down to one and that seems to have stopped that. At night when the system is off, the pump seems to stay on (all night) if the power to the system is not switched off. Last night after the heating and hot water had turned off the pump was still running and I found the boiler still lit.
Is this the PCB ? Is it something I can change easily (fairly confident with electrics etc) and are there different quality boards if this is the case ?
(have seen very cheap on fleabay)
Thanks in advance