Prima LPR450 Dishwasher Beeping

[Don27]

Hello,

I have a problem with my dishwasher. When you turn on the power it starts beeping continuously. It doesn't allow you to choose a wash program. After about 30 seconds the beeping stops and nothing happens.

Can you help?

 

[EdwardCurrent]

Hello Don.
Another post on here recommends holding the start/select button down for three seconds ??? Its got to be worth a try ?.

Ed

 

[Don27]

No, unfortunately not. I have been told the problem can be diagnosed by a flashing light but I cannot see where this would be - any ideas??

 

[cakeman]

this is an integrated slimline ,
the flashing light should be on the control panel in the top of the door
let me know how many times it flashes

 

[Don27]

When I switch it on there are no flashes. The power button stays on and it beeps. I have tried it a few times and definitely no flashes

 

[minniemoo]

Hello,

I have a problem with my dishwasher. When you turn on the power it starts beeping continuously. It doesn't allow you to choose a wash program. After about 30 seconds the beeping stops and nothing happens.

Can you help?

I have just moved into a new house and am experiencing exactly the same problem with the integrated Prima LPR450 dishwasher. Due to moving house I really can't afford an engineer at present and would be really grateful for any advice on what the problem may be. I have already tried the solution featured on another post (holding down the program select button, then switching the machine off and on) but this ha not helped. Any advice very gratefully received! Thanks