Pyronix Enforcer wireless codes

[studentspark]

Getting myself in a bit of a mess with the Pyronix enforcer wireless user code

I have an A and B zone for full set and night

Want to be able to full set the alarm with a prox fob
And full set or part set when I use the user code.

I had the user code set as I wanted it - needing to select A / B
I then tried to program a tag, the tag worked, but not full set, it was full or part set.
The user code then would not work when typed in.

Played around and got the code to work , but only full set, and the fob does a full set

How do I get the code to do full/part set, and the fob to do a full set
Does that make any sense.

I think it might be something to do with flexiset?


Many thanks

 

[sparkymarka]

? Are you trying to have the prox fob in the same slot as the code ? I would normally put the prox or radio fob in 10 or 11 so any added codes don't override the fob ... Enter D master code , add codes , user code scroll to 10 add fob , yes to everything ( call it fob 1 in user name ) exit manager mode .this should be standard code

 

[musszzy]

Bit late on this one but if u use tag then need to switch of flexiset for that user and allocate it to one area. Yes it needs it's own user location.