radial extension

[andrew299]

Hello all,
I think I know the answers to these questions already but would like to confirm the answer.
I have a radial circuit with 4mm cable and a 30A fuse. I have identified two double sockets that could be the end of the circuit (they both have one cable entering the box). Is it possible to extend off of one of these circuits to a new socket?
Also is it possible to extend using a FCU 13A to a new socket using 2.5mm cable? (i.e existing double socket - 2.5mm - FCU - 2.5mm to socket (Appliance))?

Thanks
Andrew

 

[luminaire]

Is it possible to extend off of one of these circuits to a new socket?

Yes

Also is it possible to extend using a FCU 13A to a new socket using 2.5mm cable? (i.e existing double socket - 2.5mm - FCU - 2.5mm to socket (Appliance))?

You can use 2.5mm cable from the load side of the 13A FCU to another socket if you wish, or simply extend using 4mm.