How will a 1300 rad fit between 1275 spaced rad pipes without altering the pipes?Any 1300 X 600 will fit.
That would require extending the pipework .Any 1300 X 600 will fit.
NopeThat would require extending the pipework .
Please explain how a rad that is 25 mm wider ,could still align with the pipework.Nope
There will be sufficient movement of existing pipework to enable it to fit. You only need 12.5 either side.Please explain how a rad that is 25 mm wider ,could still align with the pipework.
Having not seen the pipework installation ,that's quite an assumption.There will be sufficient movement of existing pipework to enable it to fit. You only need 12.5 either side.
Having not seen the pipework installation ,that's quite an assumption.
It's also down to how you measure, the 1300 will be no wider than the 1275.Having not seen the pipework installation ,that's quite an assumption.
Won't be any play whilst radiator is connected.Heres my pipe work...as you can see it's fairly old.... ive tried moving them but there's no play at all
And alter the pipework as / if required.It's also down to how you measure, the 1300 will be no wider than the 1275.
Well ,all you need to do now is follow this advice
And alter the pipework as / if required.
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local