Hi,
I need to reduce the height of a small area (about 15cm x 10cm) of my concrete floor which for some reason is about 5mm higher than the rest of the floor.
I've tried the bolster chisel approach but this was taking an age and I've now borrowed a 4" angle grinder. Would this be suitable for levelling this concrete area and if so, what would be the best grinding disk for the job.
I realise that dust will get everywhere so want to try to get the job done as quickly and effortlessly as possible.
Many thanks as ever,
Damian
I need to reduce the height of a small area (about 15cm x 10cm) of my concrete floor which for some reason is about 5mm higher than the rest of the floor.
I've tried the bolster chisel approach but this was taking an age and I've now borrowed a 4" angle grinder. Would this be suitable for levelling this concrete area and if so, what would be the best grinding disk for the job.
I realise that dust will get everywhere so want to try to get the job done as quickly and effortlessly as possible.
Many thanks as ever,
Damian