Replace Danfoss TP5000 Si Range with Hive

[chudy85]

Hello,
I am looking for help how to wire smart thermostat using existing wires.
At this moment I have Danfoss TP5000 Si Range but i would like to have hive mini.
I checked my current wires and Danfoss is using 2 wires which one of those is live cable.

This is Damfoss wires at this moment.
Another Damfoss thermostat is downstairs but I would like to replace only one in my master bedroom.
Also i have those 2 guys in cupboard.

Wires on my boiler are connected like this.

I was looking for Hive wiring diagram and i have no clue how i can do it. Can anyone help me with this?

 

[CBW]

You need to find the wiring center/box, as all the wires you need are in there.

 

[chudy85]

how the wiring center/box looks like ?

 

[CBW]

Some are like pictured or some use a back box

 

[chudy85]

Yes it is in my cupboard i will check it tomorrow

 

[ericmark]

Boiler looks like one able to use OpenTherm, so there is a thermostat able to work with both, up to 10 zones. Three letters but can't remember what they are, but there is only one make that combines OT and zone valves.

 

[CBW]

Eph? Esi?