Fault finding a bottle fridge quickly as the internal fluorescent would not work. This is a bottle fridge behind a bar with bottled beers.
Ballast in the back, starter bottom right, switch bottom left, tube top front middle. Bits spread everywhere!
While trying to test continuity around the lighting circuit, I found the MOULDED plug was reverse polarity! Light fitting would be live with switch for the light off.
This would not be picked up during a PAT test - no way to check.
Wonder how many others are like it?
Ballast in the back, starter bottom right, switch bottom left, tube top front middle. Bits spread everywhere!
While trying to test continuity around the lighting circuit, I found the MOULDED plug was reverse polarity! Light fitting would be live with switch for the light off.
This would not be picked up during a PAT test - no way to check.
Wonder how many others are like it?