Self Levelling...got half way across the floor then the mixer blew up!

[Brian Forde]

So, my drill gave up the ghost whilst I was only half way through laying SLC . My question is, can I just continue and complete the floor or do i need to somehow seal the now dry (more or less) SLC??? My worry is where the new and old join and the possibility of not bonding properly as they'll overlay.

 

[bobasd]

without seeing it its difficult to say what to do.
but its not a big deal and will be easy enough resolved.
why not mix by hand?

do you have any primer on hand - or even Pva if no damp isues?
you could prime the last 150mm of SLC, and the next 150mm bit of floor, and then begin to pour and using a wood or plastic trowel, trowel float the join.

whats going over the SLC?