Setcion 607 - do i need to comply?

[mbrown]

This is the scenario:

32A SP&N supply, wired in 6mm² to a junction Box (JB) with Live, Neutral & Earth Terminals.
Connected to the JB, via flexible cord, is a power strip (PDP) with up to 12no. IEC sockets fixed into a Server Cabinet (cab).
Several items of Server/comms equipment is then fed from the PDP.
The earth leakage currents are not known.
The cab is located within a designated room with limited authorised access.

Do I need to comply with Section 607?

 

[andy]

32A protecting a computer is a bit high

 

[Lectrician]

Yes you do - Olsan do complient PDP's

 

[plugwash]

i seriously hope this IEC outlet panel has some form of overcurrent protection on the outlets,

 

[andy]

i seriously hope this IEC outlet panel has some form of overcurrent protection on the outlets,

me2. i would trust a 32A MCB to protect all my computer

 

[ChrisRogers]

the ones i've worked with tend to have individual fuses.

 

[felix]

Is that flexible cord between junction box and power strip good for 32 amps?

 

[mbrown]

the equipment draws close on 23Amps

 

[mbrown]

thanks I'll check them out