Corner branch.
They ain't cheap!
They ain't cheap!
Sewer pipe air vent question
- Thread starter AverageDIYerEssex
- Start date
- Joined
- 9 Aug 2023
- Messages
- 98
- Reaction score
- 6
- Country
£54.99!!!! lol. Wow. Ok I'm gonna get my crayons out again one sec...
- Joined
- 9 Aug 2023
- Messages
- 98
- Reaction score
- 6
- Country
Ok. Front view now. How about coming round the bend, then having the air vent coming up from the next piece of pipe such as a branch (which I already have) and then double bend it back into the coroner for the vertical run?
- Joined
- 28 Sep 2020
- Messages
- 474
- Reaction score
- 153
- Country
Assuming that the 90 degree bend in the corner is a standard fitting, I can't see an issue with this.
It's almost identical to the setup in my place BUT note that my waste heads directly down to the drains at the point it leaves the bathroom!!
- Joined
- 9 Aug 2023
- Messages
- 98
- Reaction score
- 6
- Country
I've actually just seen this on the Flomaster website...
If I can fit an AAV around 2-300mm above the soil pipe I don't need to bend it back towards the corner. Does this sound right? I'm sure 800mm was mentioned before.
If I can fit an AAV around 2-300mm above the soil pipe I don't need to bend it back towards the corner. Does this sound right? I'm sure 800mm was mentioned before.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
