F
fannybaws
Sorry, should have said, it's a power shower (so integral pump) and its the thermostatic type that cuts off with a big temp difference!
15mm inlets on the shower so a 15mm feed would suffice I thought, Is that not the case?
What would it take to supply the HW (to the shower) from the HW tank if the immersion was used ? Is an Essex flange no good?
cheers for the replies gents
I am loathe to do this when I am not 100%
15mm inlets on the shower so a 15mm feed would suffice I thought, Is that not the case?
What would it take to supply the HW (to the shower) from the HW tank if the immersion was used ? Is an Essex flange no good?
cheers for the replies gents
I am loathe to do this when I am not 100%
