Hi, I have the above combi boiler, which is only 18months old.
I cam e home this evening to find it not working. I've tried all the stuff it suggests in the manual but nothing seems to get it to work.
Using the diagnostic fault finder is would appear that it is in Ignition Lock.
The LED1 is off, and LED2 is red.
I can get it to LED1 green and LED2 off, and can hear a whirring noise (pump/fan), however it revert back to LED1 off, and LED red after a very short time.
I can't hear any flame, although I can hear a faint clicking, which I suspect is the ignition trying to work.
The gas is switch on (ie my cooker hob works), and when I turn a hot water tap on, I hear a click in the boiler.
I did note that the water pressure was at 0. I have subsequently primed the system and it now shows 1 bar.
PLease help, my house is getting cold
I cam e home this evening to find it not working. I've tried all the stuff it suggests in the manual but nothing seems to get it to work.
Using the diagnostic fault finder is would appear that it is in Ignition Lock.
The LED1 is off, and LED2 is red.
I can get it to LED1 green and LED2 off, and can hear a whirring noise (pump/fan), however it revert back to LED1 off, and LED red after a very short time.
I can't hear any flame, although I can hear a faint clicking, which I suspect is the ignition trying to work.
The gas is switch on (ie my cooker hob works), and when I turn a hot water tap on, I hear a click in the boiler.
I did note that the water pressure was at 0. I have subsequently primed the system and it now shows 1 bar.
PLease help, my house is getting cold