I have fitted a Y piece soil fitting to my soil to add a gulley for a sink, problem being the section of the y piece runs towards the upstream instead of in the direction of flow, it works ok, but will building control have an issue with this and will I need to swap it round?
Reason I fitted like this was it saved me using extra pipe and was easier to connect, if I have to swap it round I'll `just have to redo it..
I've attached a picture below...
Any suggestions or help would be appreciated...thanks.
https://www.dropbox.com/s/1hqf7kz4mgkc1wn/2013-04-19 16.39.58.jpg
Reason I fitted like this was it saved me using extra pipe and was easier to connect, if I have to swap it round I'll `just have to redo it..
I've attached a picture below...
Any suggestions or help would be appreciated...thanks.
https://www.dropbox.com/s/1hqf7kz4mgkc1wn/2013-04-19 16.39.58.jpg
