I switched off CH before going on holiday. When I switched back on there is no display on sunvic programme and buttons are not responding. Tried reset button also but nothing. Checked fuse and its OK. There is also faint glow of light in screen. Was functioning perfectly beforehand. Any ideas? Lolly
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
sunvic select xl no display!
- Thread starter lollylolly22
- Start date
The back up battery has failed. It may come on after a few hours. If not time for a new one.
Jeff
Jeff
Thanks Jeff the gas man.
Fiddly, but job done. Replaced battery, which cost me less than £1.00.
Fiddly, but job done. Replaced battery, which cost me less than £1.00.
- Joined
- 6 May 2018
- Messages
- 1
- Reaction score
- 0
- Country
Thankyou!!!!! Have just found this old thread and you have saved me an expensive electrician call out charge. I changed the battery and it worked xxxxxxxxxxxxxx
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Similar threads
