Suspended concrete floor load capacity?

Joined
18 Aug 2010
Messages
60
Reaction score
2
Location
Manchester
Country
United Kingdom
I was wondering the thoughts on if a suspended concrete floor in a 50 year old Ex council house would take the weight of a water tank sat as in the pathetic pic i have drawn below, it will weigh around 2500kg, so around 1 1/2 pallet of bricks, sat right up to the three walls. the footing go down a good 4 foot.
Tank dimensions are 9x3x3.5 feet


tank.png
 
Last edited:
Sponsored Links
Is it a suspended concrete floor? - unusual unless it is a flat.
If it is, the depth of the footings is irrelevant.

What matters is the thickness and condition of the concrete, and the state of any reinforcement in it,
all of which are unknowns.

Keep the mop and bucket handy.
 
Hi tony, yes it is a suspended concrete floor in a semi house. the concrete is a 6 inch thick, not a clue on the reinforcement though, i do remeber there was also two RSJ under the floor, which i thought strange, but hen i am not a floor expert. I was thinking the best support on the floor for the tank would be mainly around the edge so more force down close to the edge/footings.
 
Thought i would go on an adventure to the center of our house. Wish I never...I think. These are picks of uder the floor
 

Attachments

  • 20151207_165948.jpg
    20151207_165948.jpg
    200.8 KB · Views: 199
  • 20151207_165725.jpg
    20151207_165725.jpg
    155.5 KB · Views: 191
  • 20151207_165721.jpg
    20151207_165721.jpg
    178 KB · Views: 200
  • 20151207_165651.jpg
    20151207_165651.jpg
    170.6 KB · Views: 191
  • 20151207_165617.jpg
    20151207_165617.jpg
    153.3 KB · Views: 171
  • 20151207_165549.jpg
    20151207_165549.jpg
    129.6 KB · Views: 191
Sponsored Links
Doesn't look like it would be a disaster if it failed. Are any third parties affected? Is that the party wall? are you prepared to accept liability for it going wrong? If so, just get on with it. If not, find someone you can pay to take responsibility
 
Doesn't look like it would be a disaster if it failed. Are any third parties affected? Is that the party wall? are you prepared to accept liability for it going wrong? If so, just get on with it. If not, find someone you can pay to take responsibility


Hi, thanks for the reply, yes it is a party wall. So you are saying that the three walls/footing the walls go down to will not take the extra weight. Infact the tank will be sat on all four walls footings, the wall under the kitchen in th epics where the beams are is not the lower party wall but another under the floor.
We are insured fi that cover water damage i dont know and i will take liability of course.
 
Sounds like you're set then.. Do it because your area is well supported, won't wreck the neighbouring house if it fails and you're happy to do the work and accept responsibility for doing anything wrong, what's not to love? :
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top