I was assuming the OP was just brining in the tails through stuffing glands, else brass glands will be OK but expensive. Don't use a steel locknut directly onto the switchfuse case; use a brass one or banjo in between.
SwitchFuse/DNO Connections
- Thread starter ScottishGasMan
- Start date
Sponsored Links
- Joined
- 22 Jan 2007
- Messages
- 8,316
- Reaction score
- 4,140
- Country
Thanks guys. Reason being the hager switchfuse I have has one 30mm knockout top and bottom. And due to space constraints the swa must come in the bottom.
If its a suitable option then my preferred way would simply be to cut 3 smaller gland holes close to each other and put a slit between them.
If its a suitable option then my preferred way would simply be to cut 3 smaller gland holes close to each other and put a slit between them.
You only need 32mm, not 38 - wouldn't take long with a decent rat-tail file.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
