TDC30P HOTPOINT TUMBULE DRYER FAULT

[manx]

HI CAN ANYONE HELP ME. I HAVE A HOTPONT CONDENCER TUMBULE DRYER AND IT WILL NOT HEAT.IT IS NOT THE CUT OUT STATS ON THE ELEMENT AND IT IS NOT THE ELEMENT .THEY ARE ALL OK. BUT WHEN I SWICH IT ON THERE IS NO POWER GOING DOWN TO THE STATS OR ELEMENT CAN ANYONE HELP.
___________________________
lynda, moderator

please note forum rule 6

 

[tiredengineer]

There should be an exhaust stat. You'll have to find where it's located (unless someone else knows).


Unplug your appliance before working on it.

 

[nigeld]

theres a stat located top right of door opening

 

[manx]

thanks to all who told me about the exhaust stat i did look at that and tha is ok

 

[tiredengineer]

Could be it thinks it's full of water, blockage? and this would cut power to the heater.



Unplug your appliance before working on it.

 

[Pat-UK]

Read what NigelD said, it will most likely be the stat located at the top of the door opening.

 

[manx]

thanks for your help found fault on timer unit. thanks all