We have a 4 year old combi boiler, which has been working well up untill we had some numpty try to fit a water meter to the hot water feed near the boiler and removed the pressure reducer from the cold feed, which caused a few joints to blow etc when we turned the heating on last September or so.
As the system is under a BG repair/maintenance contract we have had numerous BG men out to fix one problem after another when the heating failed to come on. Anyway now it does work ok, but the water pressure drops every now and again, and it has done this more frequently this last few weeks. Consequently I have to keep topping it up to get the heating to work again.
I cannot see anything obviously wrong nor water coming out anywhere, but I reckon there must be soem kind of leak for the fault to happen.
Any ideas as to how a leak can be found if its not obvious?
Thanks
As the system is under a BG repair/maintenance contract we have had numerous BG men out to fix one problem after another when the heating failed to come on. Anyway now it does work ok, but the water pressure drops every now and again, and it has done this more frequently this last few weeks. Consequently I have to keep topping it up to get the heating to work again.
I cannot see anything obviously wrong nor water coming out anywhere, but I reckon there must be soem kind of leak for the fault to happen.
Any ideas as to how a leak can be found if its not obvious?
Thanks