Three Phase Momentary Switch

I don't see the benefit of doing away with a start stop two button to a single start button where you need to keep your finger pressed in. Seems harder work to me. Not sure what the lift is, I was thinking like a car lift but the OP hasn't really explained it.
 
I don't see the benefit of doing away with a start stop two button to a single start button where you need to keep your finger pressed in. Seems harder work to me. Not sure what the lift is, I was thinking like a car lift but the OP hasn't really explained it.
I take it you are referring to car lifts where they generally don't have a hold on function and exactly the facility Mister Fish is aiming for.
 
I don't see the benefit of doing away with a start stop two button to a single start button where you need to keep your finger pressed in. Seems harder work to me. Not sure what the lift is, I was thinking like a car lift but the OP hasn't really explained it.
Car lifts have to be operated in the manner the op is trying to achieve. You can't have a situation where someone can activate a switch then walk away or be distracted leaving the lift in motion. even with limit switches.
 
It is a car lift and I need to stop the grease monkeys from pressing the go button and walking away. Stopping the contactor from latching by disconnecting 14 from A1 seems to have done the trick.
Thanks everyone for the discussion which pointed me in the right direction
 
Car lifts have to be operated in the manner the op is trying to achieve. You can't have a situation where someone can activate a switch then walk away or be distracted leaving the lift in motion. even with limit switches.
Obviously.
 
It is a car lift and I need to stop the grease monkeys from pressing the go button and walking away. Stopping the contactor from latching by disconnecting 14 from A1 seems to have done the trick.
Thanks everyone for the discussion which pointed me in the right direction

It should have never been constructed like that, I believe the regulations (if that's the correct term in this situation) even state 2 go buttons so it's a 2 handed job to move it, Often achieved by using 'UP' and 'GO' or 'DOWN' and 'GO' simultaneously and variations on that have been in place in the very few I've dealt with.
 
It is a car lift and I need to stop the grease monkeys from pressing the go button and walking away. Stopping the contactor from latching by disconnecting 14 from A1 seems to have done the trick.
Thanks everyone for the discussion which pointed me in the right direction
Makes sense now. I assumed it was for cars after thinking about it
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top