Underfloor heating configuration

Joined
16 Nov 2023
Messages
2
Reaction score
0
Country
United Kingdom
Hello all,

Having recently moved house, we've just changed our old unreliable boiler and vented hot water tank system for a Viessman 100 combi boiler.

We have radiators upstairs and a few downstairs - all now getting much better heat through them. We also have two wet underfloor 'zones' downstairs. The three circuits are separate and controlled by new Tado thermostats.

The underfloor system has two switches:
1. Drayton zone valve actuator - set at position A
2. Wilo pump - the plumber has set it at the 'fixed' (rather than variable flow, which the manual seems to suggest is for underfloor systems) at max speed 6.
Plus, it also has a radiator style thermostat knob on the pipe to control the heat?

These were both here before the heating system change, but I'm sure were in a different position. So far, the smart meter seems to suggest that our underfloor heating is quite expensive, despite being on low and not very often!

Any tips and suggestions very welcome! Have been in poorly heated houses for a long time, so would be good to get to grips with the system!!
 

Attachments

  • 17001672234901038965424949579428.jpg
    17001672234901038965424949579428.jpg
    131.9 KB · Views: 24
  • 17001672719197751290485628064282.jpg
    17001672719197751290485628064282.jpg
    242.1 KB · Views: 20
  • 17001672940273108314912933952863.jpg
    17001672940273108314912933952863.jpg
    357.7 KB · Views: 17
Sponsored Links

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top