Veritas Excel & Pyronik Belle bell box...no sound but st

Joined
5 Jan 2008
Messages
152
Reaction score
2
Location
London
Country
United Kingdom
Hi all,

I've just installed a Veritas Excel alarm and Pyronik Belle Box (I used exisiting wiring and PIRs).

Everything went ok.

However, when I try the bell test there's no sound. But when I try the strobe test that works.

I thought it was maybe the old wires, so I connected brand new test cable from the front of the control panel to the bell box....same result.

Any ideas?

(BTW, not sure if this is of any significance, but if I have the sound jumper in the bell box set to 'normal' (i.e. if the jumper is present) and I then close the lid, the sounder doesn't stop ringing. I therefore remove the jumper, connect the bell box's internal battery (it sounds for 5 seconds and then switches itself off), I then replace the jumper, close the lid, power up the system and try the various tests. I'm actually thinking this has something to do with it, or, should the system return to 'normal' when I replace the jumper?).

Any ideas of what I'm doing incorrectly?

Thanks.
 
Sponsored Links

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top