I am going around in circles and getting confused. I am just about to replace the main bathroom and I am stuck on taps.
We have the old fashioned stored hot and cold water. The pressure in the bathroom would be around 0.2 bar.
I am looking at taps for the bath and found some nice Grohe eurodisc that attach to the wall. They are suitable down to 0.2 bar. This gives an expected flow rate of 11l per min at 0.1 bar
Now the bath is 164 litres and assuming I would will is 60% full. This gives 9 min to fill the bath. This would seem rather a long time.
Couple of questions
1. Has anyone fitted the eurodisc in a low pressure situation. Does it work well?
2. Any other recommendations for wall mounted bath fillers?
Any help would be greatly appreciated.
Regards
Ben
We have the old fashioned stored hot and cold water. The pressure in the bathroom would be around 0.2 bar.
I am looking at taps for the bath and found some nice Grohe eurodisc that attach to the wall. They are suitable down to 0.2 bar. This gives an expected flow rate of 11l per min at 0.1 bar
Now the bath is 164 litres and assuming I would will is 60% full. This gives 9 min to fill the bath. This would seem rather a long time.
Couple of questions
1. Has anyone fitted the eurodisc in a low pressure situation. Does it work well?
2. Any other recommendations for wall mounted bath fillers?
Any help would be greatly appreciated.
Regards
Ben