Washing Machine Candy Grand O Vita - E07 Error Code

[Dazzh]

Hi All,

Looking for some help please.
Daughter in Laws Candy Grand O Vita Washing machine was showing an 08 Error code. I checked the internet and saw that it could be a problem with the motor brushes. Sure enough these were worn down so I replaced both and tested various programmes, on an empty load, and it appeared to work.
However its now showing an 07 Error code and will not complete a programme, it finishes with about 10 mins left to run.
It will still complete a programme it if theres no washing load in the machine.

Any suggestions as to what I can try please?

 

[jj4091]

I think E07 is the door lock code, check you have not dislodged a plug at the door lock or there is a loose wire between that & the pcb. Also double check the motor is spinning freely with the belt off.

 

[JaniJohanson]

@Dazzh did you ever figure this out?

I have a hoover wdyns654d manuftured by Candy, and am in the same scenario.

Ours started failing on e07 and then e08, I replaced the brushes and e08 has gone. For the most part it completes the cycles however after reaching the end and unlocking the door, the door lock symbol stays illuminated and after a few more minutes the door re-locks itself and the machine displays e07.

Infuriating issue. Anyone any idea?

 

[Dazzh]

Hi,

I did the brushes and the door lock. Machine is still working but will occasionally still throw up the E07.
Sorry can't be of any mor help