Waste water pipe replace

[KennyPowers]

Hi all,

The waste water pipe coming out the bathroom sink/bath is leaking at the right angle bend.

What would be the easiest way to tackle replacing the joint & pipework? Assuming I'd have to hacksaw it off, it wouldn't leave a lot to play with?

Cheers

 

[just pumps]

Clean it and fill it.

 

[KennyPowers]

I think part of the problem is it doesn't have the drop in height to the main downpipe, so the water sits at the right angle joint.

I'm assuming the pipe & joints are glued together, but not sure how the smaller pipe is connected to the larger down pipe. If it is glued then that does make things trickier.

I'm not a plumber, is there anything particular you would use to fill the leaky bits with if I went down that route?

Cheers.

 

[HERTS P&D]

This would be the easiest way of a fix:

https://www.ebay.co.uk/i/2632363600...MIg4KW2f7e6gIVl4XVCh39kwe9EAQYCiABEgLFzPD_BwE

Andy

 

[KennyPowers]

Hi Andy,

That would work (although not look great), but how would you tackle the joint where the smaller pipe couples to the large downpipe?

Cheers.

 

[HERTS P&D]

A line of this around the joint:

https://www.amazon.co.uk/CT1-Black-Sealant-Adhesive-290ml/dp/B00794BBD0

Andy