what size toilet cistern connector

[markyyyyyy]

I currently have a cold feed first fixed in for my toilet and i put a copper pipe with a 15mm isolation valve at the top coming out of the floor. Therefore i need a flexi hose that connects onto the 15mm isolation valve, and the other end connects into the toilet cistern.

I always get confused with these!

cheers

 

[CBW]

One of these https://www.toolstation.com/tap-tai...MIrezujIr96QIVS7DtCh32xQ6rEAQYAiABEgK0lfD_BwE with one of these https://www.toolstation.com/flexi-hose-300mm/p24989 or a stub of copper and one of these https://www.toolstation.com/flexible-tap-connector/p76206

 

[markyyyyyy]

brilliant cheers! i'll go with the stub of copper as i've got plenty lying around

 

[CBW]

Make sure there’s no kinks in the hose when fitting. If there’s too small a gap, you can get shorter hoses. (150mm in length).

 

[markyyyyyy]

Make sure there’s no kinks in the hose when fitting. If there’s too small a gap, you can get shorter hoses. (150mm in length).

Yep... Bends ok but no links...