HI, I have had this integrated dishwasher for four years, no problems. then about two months ago this fault started, when i put it into any of the programs it starts normally and then it starts beeping, and when i open the door it has always gone back to the rinse program and is flashing four times repeatedly. has anybody had the same thing happen i would love to know how you fixed this problem, many thanks, Darren.
Whirlpool dishwasher G2P DWI problem.
- Thread starter drifterman
- Start date
[hi. i have got exactly the sane problem, same age machine. Did you manage to find out what the problem was?
Check the black grill in the sump [remove drain filter] this grill should be spotless, it tends to fill with slime and then as its a pressure switch the machine assumes it has water in and unless it can empty it will not progress so you get the fault light flashing.You may be able to clear by repeatedly squirting hot soapy water at it then run to drain, I had to tip machine over and remove baseplate then the pressure switch is easy [bayonet fit , quarter turn] to remove.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Similar threads
