wiring problem

[angelf]

I put in a 2 port honeywell motorised valve hot water yesterday. While doing it a brown wire came out of the choco box (not related to the m. v wires of the hw m. valve)
I combined this brown wire with the brown wire from the hw m. valve I was putting in.
Now the ch is on permanently.
Can anyone a) work out how to solve this issue.CHEERS

 

[twgas]

find where it comes from, then you should know where to put it, are ther any wires that are on their own in connector?

 

[angelf]

ok mick shall do that. There are some wires on their own but I would need to take the cover off it again to see. Cheers
M