Can someone please help. I had a blockage in the drain pump which I couldn't remove via the drain. I managed to remove the pump, clear the blockage and replace the pump but in doing so managed to spill conditioner throughout the inside of the machine including on the main pcb! (I know).
I removed the pcb, carefully dried it with a cotton bud making sure I left no damp areas and no remnants of the cotton bud behind. But, when I start the machine now it simply flashes all lights and beeps on/off.
Thanks in advance
I removed the pcb, carefully dried it with a cotton bud making sure I left no damp areas and no remnants of the cotton bud behind. But, when I start the machine now it simply flashes all lights and beeps on/off.
Thanks in advance
