Latest activity
-
Ddiy_fun_uk replied to the thread My Perfect Xmas Gift.I still laugh when reading the OMG whys and the Reported's :)
-
ericmark replied to the thread Diy house rewire.Wheelchair wheels 700 mm diameter, so the user often can't see the back of the wheel, so anything at 350 mm high is likely to get... -
foxhole replied to the thread Firefox, slowing down..Firefox has lots of issues , many sites can’t be used with it and I have to switch to safari or chrome to access some sites . -
Anaglypta, the embossed wallpaper? Patterns come and go but you might be able to match it. -
Ddptt replied to the thread Zafira b heater not working.Actually you helped me a lot here. I've just realized I've replaced the recirculation actuator and the part I need is , as you rightly...
-
foxhole replied to the thread Embedding shower tray..Last en-suite I did, laid shower tray and tiled directly to new chipboard floor , had no issues .
-
RRagnar_AT replied to the thread Have you seen how Japan does grounding of appliances?.At least some of the visible signs are in English, I'd guess India or thereabouts.
-
RIndeed, if you wall-mounted it horizontally, half the sockets would be "upside down". A possible solution to this would be to...
-
YI never ever lay a tray onto chipboard, it's the worst material ever to use in a bathroom, whoever approved that to be used in wet areas...
-
TIn the end I brought the trap to the hardware shop and tried out a few wastes. I'm returning this one, it looked like it was close to...
-
Madrab replied to the thread Embedding shower tray..I never ever lay a tray onto chipboard, it's the worst material ever to use in a bathroom, whoever approved that to be used in wet areas... -
Eendecotp replied to the thread Diy house rewire.Other parts of the building regulations apply to some aspects of electrical work - in particular, the “part M” regulations have things...
-
-
TDoes the spigot part of the flange actually fitting inside the throat of the waste? I have seen this with some 'universal' waste's...
-
TThisis replied to the thread Basin Waste to P Trap.In the end I brought the trap to the hardware shop and tried out a few wastes. I'm returning this one, it looked like it was close to...
-
Madrab replied to the thread dodgy js speedfit connections?.Yup, always wise to have some silicone grease to hand and use the lightest smear when using any push fit fitting, especially with...
