Latest activity
-
ericmark replied to the thread Pulled from another thread.In will talk around about a couple of minutes to answer this. A phase used, but as to why we say that, not a clue. As to "These ones"... -
pete01 replied to the thread Loss of circuit.Maybe the toggle doesnt switch it back on, not really sure, next time it happens I'll break it open. -
SSollie replied to the thread Changing lighting in council bathroom.@^woody^ This is really brilliant advice, thank you. You explain the process clearly and the rationale. I’m going to fill this in...
-
CountryFan replied to the thread Milwaukee.A pump stick (similar to submersible), a light and something else, possibly a heater -
This guy has hundreds of power tool repair videos, knows everything there is to know about them and is an authorised repairer for most...
-
Highway Man replied to the thread Uraemia - CKD/statins.OMG how horrific :oops: -
Water shouldn't be able to seep through to under the bath. Sounds like a bad installation of the bath. Also, if the tap is turned off...
-
Dunno ive never opened one up after the failure, but ive been to many jobs where there's no voltage coming out of the mcb.....its the...
-
Tank feed / open vent id be checking pipework with a magnet around open vent/ cold feed area.
-
SSollie replied to the thread Changing lighting in council bathroom.
-
-
CountryFan replied to the thread Certain tools - do I need them?.So I’ve just been, but didn’t get any of them. The Callipers I couldn’t make up my mind and the tap/die set doesn’t state what it’s made...
-
SSollie replied to the thread Changing lighting in council bathroom.@Murdochcat Thanks so much for your reply and for reminding me, yes Ip65. It’s been a while since I looked at what is there currently...
-
Tterryplumb replied to the thread Bath tap issue.When using the shower it's very likely that water would ,or could, collect anywhere around the vicinity of the tap ,hence it shouldn't...
-
CountryFan reacted to Tigercubrider's post in the thread Certain tools - do I need them? with
Thanks.
I am more of a DIY than trade, although I am lucky to have worked alongside a well equipped wood and metal workshop with high end tools... -
ericmark replied to the thread Plug tops / Plug caps?.Oh, what a can of worms you have opened. I have debated this a lot with my son, as to the Myson fan assisted radiator, and if moving air...
