Latest activity

  • C
    If the house is otherwise reasonable condition and that is obviously letting it down I'd repair it. You can usually determine areas...
  • M
    MidsTW replied to the thread Installing Oak Worktop.
    What length screw would you typically use? With 15mm cabinet thickness, 2mm washer I was thinking 30mm but would ~13mm into a 27mm...
  • G
    Hello Just looking for some suggested white (gloss I think) paint for one of my repaired windows that’s held in using putty? I’ve been...
  • B
    blup replied to the thread Stop the Yachts.
    Stop the shadow fleets would be more appropriate but nothing from Re form on that.
  • pete01
    pete01 replied to the thread Diynot summer party.
    Doubt it
  • S
    shipfinex reacted to motorbiking's post in the thread Stop the Yachts with Thanks Thanks.
    There are a couple of ferries already in service. But the range is not where it would need to be. Hybrids and foiling will probably...
  • S
    shipfinex reacted to Odds's post in the thread Stop the Yachts with Thanks Thanks.
    The superyacht industry itself cares “more and more”, according to Michael Breman, sales director, Lurssen. “We have a customer who is...
  • S
    shipfinex reacted to fillyboy's post in the thread Stop the Yachts with Thanks Thanks.
    My first yacht had a 10hp single cylinder volvo MD1 engine, 2 jerry cans of red diesel at 5 quid each pretty much lasted me the year...
  • S
    shipfinex reacted to motorbiking's post in the thread Stop the Yachts with Thanks Thanks.
    There are arguments on both sides. if you look at the Greek islands for example, 20 years ago I was sailing in all the cool spots now...
  • P
    peace1969 replied to the thread Mervier TS700 Issue.
    Morning Rulland, doing the steps has worked. But I had to change the Engineer code because both menu would never have worked with the...
  • fillyboy
    fillyboy reacted to Munroast's post in the thread Gorton and Denton with Thanks Thanks.
    the bookies have the greens as favourites - 4/7 with Reform 10/3, Labour 5/1 and tories 600/1 I have my fingers crossed for reform but...
  • B
    blup replied to the thread Gorton and Denton.
    Have you bet on the favourite for the National. Bookies seem to encourage push the one that is popular or will draw in the punters.
  • B
    blup replied to the thread Kitchen sink basket wastes.
    I found it’s worth adding a dollop of sealant, especially withe the mcalpine ones which seem to leak after a good few months
  • HERTS P&D
    HERTS P&D replied to the thread Kitchen sink basket wastes.
    I use a thin line of silicone on the bottom washer where it seals against the sink. Andy
  • D
    Dec27 replied to the thread Diynot summer party.
    I found some members talked down to a lowly gas engineer. I don’t hold any grudges, just when I ask for commercial advise it’s like...
Back
Top