Latest activity
-
GGary111 replied to the thread We have very high water meter readings any ideas please?.Another thing is my wife insists the shower pressure is lower maybe I should get a pressure gauge?
-
Sthe screw holes are too shiny to be plastic, looking at the screw hole bottom right adjacent to your pink line seems to be 2 crud...
-
GGary111 replied to the thread We have very high water meter readings any ideas please?.I think the pipe is just blocked. I had some cowboy fascia fitters who cut the pipes flush because it looked neater. It felt like when I...
-
ericmark replied to the thread Log periodic aerial elements length.Sorry seems are on free platforms I had clearly picked the wrong one, I do it seems to have :- Freely, Free to Air, Freeview, and Sky... -
-
Ssrb62 replied to the thread Wiring help.Would a screw from the plastic connector do?
-
Alec_t replied to the thread We have very high water meter readings any ideas please?.Well your middle pic shows the water level right up to the overflow, so if the water's not draining out through that where has it been... -
Bbig-all replied to the thread Multiple Joints.another thought once it has settled down what about clear resin to highlight the character and iff it further moves or opens up else...
-
GGary111 replied to the thread We have very high water meter readings any ideas please?.Hi John, thanks for your message, I’m trying to limit the amount of times I go in the loft so I turned the stop tap inside the house...
-
Bear2Biker replied to the thread Wiring help.the screw holes are too shiny to be plastic, looking at the screw hole bottom right adjacent to your pink line seems to be 2 crud... -
Harry Bloomfield replied to the thread Wiring help.It looks like a BESA threaded rear entry conduit box. A brass 2BA screw, might fit one of the threaded lugs, to provide an effective... -
Ssrb62 replied to the thread Wiring help.Thanks. I'd assumed it was some sort of plastic but looking more closely, it could well be made of steel. I don't have a multimeter but...
-
Ssrb62 replied to the thread Wiring help.Thanks, it's not so much that I need an earth wire (as it's just an old type of rose/fitting) it's more why there is a bare wire.
-
Eendecotp replied to the thread Wiring help.That’s certainly an “earth wire” in some sense, but you don’t know whether it is actually connected at the other end - quite possibly...
