Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. D 8 mm C 25 mm Overall length 68.5 mm Shank Diameter 1/4 inch

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. D 8 mm C 25 mm Overall length 68.5 mm Shank Diameter 8 mm

For veining, panelling, 'V' grooving, bevelling & chamfering. D 1/2 inch D 12.7 mm C 7/16 inch C 13 mm C2 13 mm C3 11 mm A 60 degrees Overall length 53 mm Shank Diameter 1/4 inch

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. D 3 mm C 3/8 inch C 9.5 mm Overall length 56.5 mm Shank Diameter 1/4 inch

For coves and part of a rule joint with 1/2" shank diameter. D 12.7 mm C 19 mm R 1/4 inch R 6.3 mm OL 56 mm

A bearing guided reversible finger jointer, to increase the gluing area for edge to edge joints.

Ideal for shelves. Edge moulding applications only. D 22 mm C 25 mm B 16 mm R 3 mm Shank Diameter 1/2 inch

This can be used for recessing circular hinges, accurate repetitive routing. This should be used with a template and guide bush fitted to the router base. D 35 mm OL 60 mm

For producing ovolo and rounding over edge moulds, using a side fence or back fence. D 1/2 inch D 12.7 mm C 23/64 inch C 9 mm R 4.8 mm Overall length 51.5 mm Shank Diameter 1/4 inch

This two flute cutter gives a finer finish and has better plunge cutting characteristics. D 1/4 inch D 6.3 mm C 28 mm OL 63 mm Shank Diameter 1/4 inch