Shank mounted bearing profilers are ideal for template guidance.

Self-guiding 45° chamfer/bevel cutter. D 32 mm C 1/2 inch C 12.7 mm B 9.5 mm A 45 degrees Overall length 62 mm Shank Diameter 1/4 inch

For decorative panel and veining work. D 3/8 inch D 9.5 mm C 7.5 mm R 4.8 mm Overall length 47.5 mm Shank Diameter 1/4 inch

Shank mounted bearing follows template mounted on board surface. It is advisable that the template is at least 5mm thicker than the cutter. D 22 mm C 1/2 inch C 12.7 mm B 22 mm R 4 mm R2 5.5 mm

An initial cut with a straight cutter is required to produce the drawer pull profile. D 45 mm D2 24 mm C 17 mm R 5 mm R2 2 mm Overall Length 60 mm Shank Diameter 1/2 inch

19mm radius Bead/nosing cutter

12mm radius Bead/nosing cutter. D 42.9 mm C 25.4 mm C2 40 mm R 12.7 mm Shank Diameter 1/2 inch

16mm radius Bead/nosing cutter D 50.8 mm C 32 mm C2 51 mm R 16 mm Shank Diameter 1/2 inch

For coves and part of a rule joint with a 1/4" shank diameter. D 8 mm C 1/2 inch C 12.7 mm R 4 mm OL 46 mm

By making a second pass at 90 degrees a full corner bead can be cut. D 31.9 mm D2 28.6 mm B 16 mm R 7 mm Shank Diameter 1/4 inch