TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. D 3/8 inch D 9.5 mm C 32 mm OL 76...

A precision made, laser cut zinc plated steel template comb for the CDJ300.

For veining, panelling, 'V' grooving, bevelling & chamfering. D 1/2 inch D 12.7 mm C 1/2 inch C 13 mm C2 9 mm C3 6 mm A 45 degrees Overall length 53 mm Shank Diameter 1/4 inch

Precision made laser cut zinc plated steel template comb for the CDJ600.

Shank mounted bearing profilers are ideal for template guidance.

Self-guiding 45° chamfer/bevel cutter. D 32 mm C 1/2 inch C 12.7 mm B 9.5 mm A 45 degrees Overall length 62 mm Shank Diameter 1/4 inch

For decorative panel and veining work. D 3/8 inch D 9.5 mm C 7.5 mm R 4.8 mm Overall length 47.5 mm Shank Diameter 1/4 inch

Shank mounted bearing follows template mounted on board surface. It is advisable that the template is at least 5mm thicker than the cutter. D 22 mm C 1/2 inch C 12.7 mm B 22 mm R 4 mm R2 5.5 mm

An initial cut with a straight cutter is required to produce the drawer pull profile. D 45 mm D2 24 mm C 17 mm R 5 mm R2 2 mm Overall Length 60 mm Shank Diameter 1/2 inch

19mm radius Bead/nosing cutter