A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in soft wood, hard wood, exotic rip, plasterboard, stone fibre board and particle board. D 8 inches D 200 mm Bore 30 mm Kerf 2.6 mm Plate thick 1.7 mm No....

Profiler with shank mounted bearing guides. D 3/4 inch D 19.1 mm C 50 mm B 19.1 mm A 90 degrees

Useful for bevelling thick timbers. D 26 mm D2 12.7 mm C 35 mm C2 36 mm B 12.7 mm A 80 degrees

These blades are laser cut from hardened, chrome alloyed steel plate which is then tempered and roller tensioned. D 6 1/4 inches D 160 mm Bore 20 mm Kerf 2.6 mm Plate thick 1.6 mm No. of Teeth 48 Tooth form ATB Hook 10 degrees Quick Selector...

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in soft wood, hard wood, exotic rip, plasterboard, stone fibre board and particle board. D 12 3/8 inches D 315 mm Bore 30 mm Kerf 3.2 mm Plate thick 2.2 mm...

For biscuit jointing of timber, man-made fibre and particle board with the router. D 40 mm C 4 mm B 15 mm B2 19 mm B3 23 mm Shank Diameter 1/2 inch

Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted. These Raised Panel cutters run best at lower speeds and match our...

Recessing cutter will accommodate the Schlegel Aquamac 21 or Exitex Aquatex A10 seal. D 46.3 mm D2 34.3 mm C 10.3 mm C2 2.7 mm OL 90 mm B 28.6 mm

Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted. These Raised Panel cutters run best at lower speeds and match our...

Self-guiding cutters for rounding over edges do not require a side fence. D 32 mm C 16 mm B 9.5 mm B2 12.7 mm R 9.5 mm