Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted. These Raised Panel cutters run best at lower speeds and match our...

Purpose made for stair housing jigs. Ensures tight fit of tread in string. D1 3/4 inch D1 19 mm C 25.5 mm OL 65 mm A 95 degrees

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastic. D 2.5 mm C 8 mm OL 48 mm

Trend weather seal designed to accomodate the popular Schlegel Aquamac 63 or Exitex Aquatex P6 weather strip system and allows for a particularly small gap between the sash and frame. D 41.3 mm D2 28.3 mm C 4.8 mm C2 2.7 mm OL 67 mm B 22 mm

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in soft wood, hard wood, plywood, soft fibre, plasterboard stone, fibre board, cement bonded board and particle board. This product includes: 30-16mm bushing...

Template thickness should be 5mm thicker than cut length of cutter. Can be used to rout both tenons and housings. D 3/4 inch D 19.1 mm C 11.1 mm B 19.1 mm

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in soft wood, hard wood, exotic rip, plasterboard, stone fibre board and particle board. D 7 1/4 inches D 184 mm Bore 20 mm Kerf 2.6 mm Plate thick 1.5 mm ...

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in soft wood, hard wood, exotic rip, plasterboard, stone fibre board and particle board. D 12 3/8 inches D 315 mm Bore 30 mm Kerf 3.2 mm Plate thick 2.2 mm...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. D 5/8 inch D 16 mm C 19 mm OL 60 mm

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in soft wood, hard wood, exotic rip, plasterboard, stone fibre board and particle board. D 7 1/2 inches D 190 mm Bore 30 mm Kerf 2.4 mm Plate thick 1.6 mm ...