TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. D 3/4 inch D 19.1 mm C 25 mm OL 67 mm

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. D 3 mm C 11 mm OL 51 mm

A one piece bearing guided set. Parts are inter-changed on the arbor to alter the set-up. D 41 mm C 6.35 mm C2 10 mm E 22 mm OL 76 mm Shank Diameter 1/2 inch Timber thickness min. 15 mm Timber thickness max. 22 mm

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. D 63/64 inch D 25 mm C 25 mm OL 65 mm

These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing. D 50 mm Bore 12 mm Kerf 5 mm No. of Teeth 4

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. D 25/32 inch D 20 mm C 25 mm OL 57 mm

Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimming square with a hand chisel or a corner chisel. Suitable for Trend Hinge & Lock Jigs. D 15/32 inch...

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in soft wood, hard wood, exotic rip, plasterboard, stone fibre board and particle board. D 7 1/4 inches D 184 mm Bore 30 mm Kerf 2.6 mm Plate thick 1.7 mm ...

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in hard wood, exotic rip, plywood rip, crosscut, softwood rip and chipboard laminated one-sided. D 10 inches D 255 mm Bore 30 mm Kerf 2.4 mm Plate thick 1.8...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. D1 6 mm C 25 mm OL 57 mm