A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in soft wood, hard wood, exotic rip, plasterboard, stone fibre board and particle board. D 7 1/4 inches D 184 mm Bore 30 mm Kerf 2.6 mm Plate thick 1.7 mm ...

Standard duty arbor with 1/4 inch spindle and spacers. OL 63.5 mm Spigot dia. 1/4 inch Spigot dia. 6.35 mm Spigot length incl thread 35.5 mm Spigot thread length 14.5 mm

Bearing guided intumescent strip cutter for routing the groove for intumescent strip in a frame or door. D 40 mm C 15 mm B 32 mm E 4 mm L 41 mm

Self-guiding cutters for rounding over edges do not require a side fence. D 42.7 mm C 22.3 mm OL 70 mm B 9.5 mm B2 12.7 mm R 15 mm

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Two flutes give a clean finish to cut edges. D 7/32 inch D 5.5 mm C 19 mm OL 51...

Profiler with shank mounted bearing guides. D 19.1 mm C 1 inch C 25.4 mm B 19.1 mm A 90 degrees Overall length 78 mm Shank Diameter 1/2 inch

These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. D 3/4 inch D 19.1 mm C 1/2 inch C 12.7 mm R 9.5 mm Overall length 51 mm Shank Diameter 1/2 inch

Replacement line-up pin for the UNIBASE.

Self-guiding trimmers with bearings mounted on end of cutter. D 3/4 inch D 19.1 mm C 14 mm B 19.1 mm A 90 degrees Overall length 60 mm Shank Diameter 1/4 inch

Used for trimming plastic or plywood overlays. D 1/2 inch D 12.7 mm C 1 inch C 25.4 mm B 12.7 mm A 90 degrees Overall length 77 mm Shank Diameter 1/4 inch