A one piece set. Parts are inter-changed on the arbor to alter the set-up. For use with router table only. D 41 mm C 6.35 mm B 22 mm Shank Diameter 1/4 inch Overall length 75 mm Timber thickness min. 15 mm Timber thickness max. 18 mm

TCT cutter with staggered cutting surfaces. D 5/8 inch D 16 mm C 2 inches C 50 mm OL 101 mm Shank Diameter 1/2 inch

Sawblades designed for a professional finish in soft wood, hard wood, plasterboard, stone fibre board, particle board, veneer, plywood, MDF and hardboard.

Panel mould and edge mould cutter. D 25 mm C 8 mm R 12 mm

Profiler with shank mounted bearing guides. D 1/2 inch D 12.7 mm C 3/8 inch C 9.5 mm B 12.7 mm A 90 degrees

Finger Jointer combines an assembley of five TCT slotting cutters with an abutting-edge cutter to produce a profile that extends the glue line threefold, resulting in an extremely strong joint. D 40 mm B 28 mm E 6.0 mm OL 96 mm Shank Diameter 1/2...

3 degree undercut router bit with shank mounted bearing guide for routing a leading edge on doors to allow a tight fit against jamb. D 24.2 mm C 50 mm A 93 degrees Shank Diameter 1/2 inch

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. D 1/2 inch D 12.55 mm C 1 inch C 25.4 mm OL 66 mm Shank Diameter 1/4 inch

Two fluted tungsten carbide weatherseal groover for use on natural timbers and man made boards. D 34 mm C 2 mm OL 54.5 mm B 20 mm Shank Diameter 1/4 inch

For producing ovolo and rounding over edge moulds, using a side fence or back fence. D 5/8 inch D 15.9 mm C 13.5 mm R 6.3 mm Overall length 57 mm Shank Diameter 1/4 inch