We have had the water drained from the radiators to replace a towel rail. The plumber left it like this as he was going to refil the system the following day (today) but couldnt make it. Today we have no hot water, the boiler was on but no water has heated up. I changed the boiler to the high position and it banged a few times and the pilot light went out. We have been able to relight the pilot light but the boiler still just bangs and goes out. We have also had a humming sound from our airing cupboard which wasnt there before and is on even though the boiler isnt on.
We had problems with our boiler before, the thermocoupler went and then the pump which were both replaced.
Is there anything we can try in the meantime to get our hot water working. Also could this have been caused due to the radiators still being drained.
Thanks
We had problems with our boiler before, the thermocoupler went and then the pump which were both replaced.
Is there anything we can try in the meantime to get our hot water working. Also could this have been caused due to the radiators still being drained.
Thanks